Categories / Domestic / Lo-Chlor Chemicals / Stain Removers & Preventatives » Multi Stain Remover

Multi Stain Remover
Triple action all purpose stain remover.
Will remove all metallic & organic stains from swimming pool and spa surfaces.

Lo-Chlor Multi Stain Remover

Triple action all purpose stain remover.
Will remove all metallic & organic stains from swimming pool and spa surfaces.

 Benefits:

  • Removes iron, copper, manganes and rust stains.
  • Also removes organic stains such as algae stains, leaf stains and mould in vinyl liners.
  • Use as an all over treatment for stain removal or as a spot treatment.

Dosage:

  • 1 Kg treats up to 50,000L of pool water

Sizes:

  • 1 Kg
  • 2 Kg
  • 5 Kg

Important Notes:

  • Avoid applying Lo-Chlor Multi Stain Remover directly to a vinyl liner or painted surface as damage may result to the pool surface.
  • For vinyl liner sport treatment, place Lo-Chlor Multi Stain Remover in sock or panty hose, attach to telescopic pole and suspend over stained area.
  • For stains throughout a vinyl liner pool, dissolve Lo-Chlor Multi Stain Remover in a bucket of water and pour around the perimeter of the pool.
  • After treatment a reduction in pH and/or total alkalinity may occur. If adding pH adjuster (sodium bicarbonate) then do so very, very slowly.
  • Raising the pH and/or total alkalinity too quickly can cause a cloudy pool as well as redepositing the stain back on the pool surface.
  • Be aware that high levels of cholrine will reduce the effectiveness of Lo-Chlor Multi Stain Remover. Ideally reduce the chlorine level to zero before using this product.
  • When used with Lo-Chlor Multil Stain Remover, Filter Aid & Metal Remover aids in the removal of metals such as copper, iron, and manganese that would otherwise cause pool surface staining or water discolouration.

What happens when a pool interior stains?

All swimming pool interiors are made form chemical compounds of one type or another. Staining problems can start even before we commence filling the pool with water. Water is corrosive so it must be balanced by careful addition of certain chemicals. Added to this we must sanitise the water continually and re-check the balance to ensure the pool interior is not being attacked by the water itself and also to ensure that bathers are swimming in correctly treated water.

Staining occurs when insoluble chemical precipitates form in the pool. These may deposit on the pool interior and often they are hard to remove. For our purposes stains fall into two categories: vegetable stains caused by falling leaves and other plant matter and metal stains caused by dissolved metals in the pool water.


Click here to download MSDS


Code Description
AMS210 Lo-Chlor Multi Stain Remover 1 Kg
AMS220 Lo-Chlor Multi Stain Remover 2 Kg
AMS250 Lo-Chlor Multi Stain Remover 5 Kg